Paper Title :Emission Optimization Of Single Cylinder Diesel Engine By Using Etas-Inca Software
Author :Sandip Raut, S. D. Yadav
Article Citation :Sandip Raut ,S. D. Yadav ,
(2014 ) " Emission Optimization Of Single Cylinder Diesel Engine By Using Etas-Inca Software " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 67-70,
Volume-2,Issue-8
Abstract : Engine emission is found to be emerging problem in current era. One of the main problems associated with diesel
engine is formation of high level of NOx emission.BS-III emission norms have been followed from 2010. It is necessity to
develop engine emission which will compliance with BS-IV emission norms as BS-IV norms for light commercial vehicle will
be effectively applicable from 2015. Conventional fuel injection system was unable to fulfillment of this requirement, so it is
necessity to modify fuel injection system along with vehicle after exhaust after treatment devices. Exhaust gas recirculation
system is very effective tool for NOx optimization. In this research, four stroke single cylinder electronically controlled diesel
engine for four wheeler application was used for emission development. Emission was optimized by using ETAS-INCA
software. EGR mapping strategy and closed loop position EGR system was used for NOx reduction and CO and HC emissions
were controlled by selection of suitable catalytic converter and combustion optimization. The experimentation is carried out on
Tata Iris vehicle and tests were conducted on chassis dynamometer. Results were analyzed with previous results and it is found
that NOx is reduced by 46.6% and all engine emission parameter passed in BS-IV emission norms.
Type : Research paper
Published : Volume-2,Issue-8
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-1145
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 57 |
| |
Published on 2014-08-04 |
|