Paper Title :Experimental And Fea Of Particle Impact Erosion For Polymer Composites
Author :Mahesh Haldankar, Santoshkumar Malipatil
Article Citation :Mahesh Haldankar ,Santoshkumar Malipatil ,
(2013 ) " Experimental And Fea Of Particle Impact Erosion For Polymer Composites " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 19-22,
Volume-1,Issue-5
Abstract : The main aim of this paper is to study solid particle erosion of PMCs such as vinylester/glass and
vinylester/carbon using orthogonal array experimental approach. The controllable parameters selectedfor the study included
impingement velocity (50, 75 and 100 m/sec), impact angle (45º, 60º and 75º), erodent size (200, 300and 400µm) and standoff-distance (120, 180, 240 mm). S/N ratio analysis was performed to find the most influencing factor. Thelaminates with
[0/90] and [-55/+55] stacking sequence were characterized for erosion damage. Amongst the four parameters selected for the
study, impingement velocity had the greatest influence on the erosion rate followed by impact angle. The other two
parameters showed marginal significance. Erosion rates were lower at lower values of S/N ratio. Also, erosion wear rates of
laminate having stacking sequence [-55/+55] is lower than that of [0/90] stacking sequence.
Type : Research paper
Published : Volume-1,Issue-5
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-387
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 46 |
| |
Published on 2014-01-23 |
|