International Journal of Mechanical and Production Engineering (IJMPE)
.
current issues
Volume-8,Issue-3  ( Mar, 2020 )
Past issues
  1. Volume-8,Issue-2  ( Feb, 2020 )
  2. Volume-8,Issue-1  ( Jan, 2020 )
  3. Volume-7,Issue-12  ( Dec, 2019 )
  4. Volume-7,Issue-11  ( Nov, 2019 )
  5. Volume-7,Issue-10  ( Oct, 2019 )
  6. Volume-7,Issue-9  ( Sep, 2019 )
  7. Volume-7,Issue-8  ( Aug, 2019 )
  8. Volume-7,Issue-7  ( Jul, 2019 )
  9. Volume-7,Issue-6  ( Jun, 2019 )
  10. Volume-7,Issue-5  ( May, 2019 )

Statistics report
May. 2020
Submitted Papers : 80
Accepted Papers : 10
Rejected Papers : 70
Acc. Perc : 12%
Issue Published : 84
Paper Published : 2008
No. of Authors : 5745
  Journal Paper


Paper Title :
Process Parameters Optimization For Better Surface Roughness and Material Removal Rate of Aluminum Alloy

Author :Siluveri.Sravanthi, T.Niranjan Reddy, E.Surendar

Article Citation :Siluveri.Sravanthi ,T.Niranjan Reddy ,E.Surendar , (2016 ) " Process Parameters Optimization For Better Surface Roughness and Material Removal Rate of Aluminum Alloy " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 178-181, Volume-4,Issue-10

Abstract : In this paper experiments are conducted to improve the surface finish quality and material removal rate of a component by using carbide tips. The optimized parameter values are determined using Taguchi Method and Regression Analysis. The machining parameters used for roughing operation are Spindle Speed – 1000rpm, 1500rpm, 2000rpm, Cut Feed – 2000mm/min, 2500mm/min, 3000mm/min , Step Over – 20mm, 25mm, 30mm and depth of cut – 0.5mm. The machining parameters used for finishing operation are Spindle Speed – 2000rpm, 2200rpm, 2500rpm, Cut Feed – 1000mm/min, 1200mm/min, 1500mm/min , Step Over – 5mm, 10mm, 12mm and depth of cut – 0.3mm. The milling process is conducted on a CNC Vertical milling machine.

Type : Research paper


Copyright: © Institute of Research and Journals

| PDF |
Viewed - 62
| Published on 2016-11-07
   
   
IRAJ Other Journals
IJMPE updates
We are happy to announce that Dr. R. A. SAVANUR joined as the CHief Editor for IJMPE.
The Conference World

JOURNAL SUPPORTED BY