Paper Title :Effect of SN Addition on Microstructure and Mechanical Properties of as-Cast And Hot-Rolled Am60 Magnesium Alloys
Author :Yavuz Sun, Huseyin Zengin, Yunus Turen, Hayrettin Ahlatci, Emin Karacelebi, Mehmet Unal
Article Citation :Yavuz Sun ,Huseyin Zengin ,Yunus Turen ,Hayrettin Ahlatci ,Emin Karacelebi ,Mehmet Unal ,
(2017 ) " Effect of SN Addition on Microstructure and Mechanical Properties of as-Cast And Hot-Rolled Am60 Magnesium Alloys " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 22-24,
Volume-5,Issue-7
Abstract : In this study, the effect of Sn addition on microstructure and mechanical properties of AM60 magnesium alloys was
investigated. Sn additions were made by 0.5 and 1 wt%. Alloys were produced by conventional gravity casting in a steel
mould. A homogenization treatment at 350 °C for 24 h was performed after the casting processes. Homogenized samples were
hot-rolled by 40% thickness reduction at 1 pass at 350 °C. The results showed that Sn addition decreased the grain size of both
as-cast and hot-rolled AM60 alloys. Furthermore, Sn addition led to formation of Sn containing second phases. Tensile
properties were significantly improved by 0.5 wt% Sn addition above which a small decrease was observed. This improvement
was attributed to the refinement of microstructure and dispersion strengthening by Mg-Sn intermetallic phases.
Index Terms- AM60 magnesium alloys; Sn modification; microstructure; mechanical properties
Type : Research paper
Published : Volume-5,Issue-7
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-8702
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 76 |
| |
Published on 2017-09-11 |
|