Paper Title :Optimization of Burnishing Process Parameters on Differently Hardened 20mncr5 Steel
Author :Himanshu Khanna, Harish Pungotra, Sandeep Gandotra
Article Citation :Himanshu Khanna ,Harish Pungotra ,Sandeep Gandotra ,
(2018 ) " Optimization of Burnishing Process Parameters on Differently Hardened 20mncr5 Steel " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 22-27,
Volume-6,Issue-4
Abstract : Surface finish designates the geometry and microstructural superiority of the machined surface. Different
operations such as grinding, lapping, honing, buffing, barrel rolling, polishing, super finishing, and burnishing are required
to be performed to achieve the high surface finish. Amongst all, burnishing is a process where the hard roller or a ball tool is
engaged to the workpiece to get the better surface finish. In the present study, using Taguchi approach preliminary plan is
made for the experimentation then according to it a roller burnishing of the 20MnCr5 workpiece at different input conditions
is performed. From the analysis, it is concluded that the hardness of the material is the main contributing factor for
burnishing process.
Index terms: Burnishing, Depth of penetration, Feed, Speed, Hardness, Surface roughness.
Type : Research paper
Published : Volume-6,Issue-4
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-11791
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 114 |
| |
Published on 2018-06-19 |
|