Paper Title :Studies on Lubrication Behavior of 35c8 Steel Using Ring Compression Test and Finite Element Simulation
Author :Md Israr Equbal, Parwez Alam, Rajkumar Ohdar, Md Serfraj Alam
Article Citation :Md Israr Equbal ,Parwez Alam ,Rajkumar Ohdar ,Md Serfraj Alam ,
(2016 ) " Studies on Lubrication Behavior of 35c8 Steel Using Ring Compression Test and Finite Element Simulation " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 4-8,
Volume-4,Issue-11
Abstract : In the metal-forming process, friction plays a significant role in determining the life of the tool, the formability of
the material and the quality of the finished product. Excessive friction leads to heat generation, wear, pick-up and galling of the
tool surface. In this study, The friction coefficients of different lubricating conditions, viz., graphite in hydraulic oil, graphite in
furnace oil, DF 150 (Graphite, Water-Based) die lubricant and dry or without any lubrication were obtained from the ring
compression test for the commercial medium carbon steel. The geometry of the ring compression test specimen has been
prepared in the ratio of outer-diameter: inner-diameter: height: 6:3:2. A Finite Element simulation has been conducted to
validate the results and to evaluate material deformation, geometric changes and load–displacement etc. The simulation results
presented an excellent agreement with the experimental results.
Index Terms— Friction, Lubrication, Ring compression test, Simulaion.
Type : Research paper
Published : Volume-4,Issue-11
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-6176
View Here
Copyright: © Institute of Research and Journals
| |
 |
| |
 |
PDF |
| |
Viewed - 97 |
| |
Published on 2016-12-09 |
|
