Paper Title :Flexible Light Emitting Controllable Device based on Memristor
Author :Shawkat Ali, Jinho Bae, Chong Hyun Lee
Article Citation :Shawkat Ali ,Jinho Bae ,Chong Hyun Lee ,
(2018 ) " Flexible Light Emitting Controllable Device based on Memristor " ,
International Journal of Advances in Science, Engineering and Technology(IJASEAT) ,
pp. 6-9,
Volume-6, Issue-2
Abstract : In this paper, a novel flexible lighting circuit controllable a light emitting device (LED) through memristive
switching is proposed. The proposed device is fabricated on ITO coated PET substrate through printed technique, which is able
to control a light state of the LED to either ON or OFF resistance value of the memristor. In the construction of the proposed
LED circuit device, a high current memristor of milli-ampere current is connected with the LED in parallel, and they are
connected in series with an organic printed resistor. The most current is bypassed through the memristor with ON resistance
value when LED is required to be OFF, and LED is turned on a light when the memristor is switched OFF resistance value. The
operating voltage is 10 V and control voltage is 14 V. The maximum light intensity in the ON state of LED was 0.4 lux, and
light intensity in the OFF state was 0 lux. The response time of the LED is 25 seconds. We are sure the proposed light device
can be used in low speed electronic display applications.
Index Terms- Memristor, light emitting device, resistance, flexible, printed technique.
Type : Research paper
Published : Volume-6, Issue-2
DOIONLINE NO - IJASEAT-IRAJ-DOIONLINE-12009
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 45 |
| |
Published on 2018-06-30 |
|