International Journal of Mechanical and Production Engineering (IJMPE)
.
Follow Us On :
current issues
Volume-12,Issue-1  ( Jan, 2024 )
Past issues
  1. Volume-11,Issue-12  ( Dec, 2023 )
  2. Volume-11,Issue-11  ( Nov, 2023 )
  3. Volume-11,Issue-10  ( Oct, 2023 )
  4. Volume-11,Issue-9  ( Sep, 2023 )
  5. Volume-11,Issue-8  ( Aug, 2023 )
  6. Volume-11,Issue-7  ( Jul, 2023 )
  7. Volume-11,Issue-6  ( Jun, 2023 )
  8. Volume-11,Issue-5  ( May, 2023 )
  9. Volume-11,Issue-4  ( Apr, 2023 )
  10. Volume-11,Issue-3  ( Mar, 2023 )

Statistics report
Apr. 2024
Submitted Papers : 80
Accepted Papers : 10
Rejected Papers : 70
Acc. Perc : 12%
Issue Published : 130
Paper Published : 2388
No. of Authors : 6802
  Journal Paper


Paper Title :
PIV and TSP Measurements of Boundary Layer distributed by a Square Cylinder

Author :Ghodrat Ghassabi, Mohsen Kahrom

Article Citation :Ghodrat Ghassabi ,Mohsen Kahrom , (2018 ) " PIV and TSP Measurements of Boundary Layer distributed by a Square Cylinder " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 35-39, Volume-6,Issue-5

Abstract : Effect of wall proximity on the flow structure and heat transfer enhancement behind a two-dimensional square cylinder was studied experimentally in the present work. The experiments were performed in the subsonic open-circuit wind tunnel, and Reynolds number based on the cylinder width (D) was kept at ReD= 5130. Four cases with different gap widths, namely G/D = 0.0, 0.1, 0.2 and 0.8, were chosen for comparison. PIV with high image-density camera was employed for flow field measurement. The flow behind the square cylinder was analyzed in terms of time-averaged quantities measured by PIV, i.e., the streamline pattern and reverse-flow intermittency. Also, the temperature sensitive paint (TSP) method was applied for determination of temperature distribution of the flat plate, presenting value of the heat transfer enhancement behind the square cylinder. Results showed that the maximum heat transfer enhancement was obtained for G/D=0.2 due to the high unstable flow near the wall. Keywords - Heat transfer Coefficient, Reverse flow, unstable flow, Reattachment point

Type : Research paper

Published : Volume-6,Issue-5


DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-12502   View Here

Copyright: © Institute of Research and Journals

| PDF |
Viewed - 53
| Published on 2018-08-09
   
   
IRAJ Other Journals
IJMPE updates
Volume-12,Issue-1 (Jan, 2024 )
The Conference World

JOURNAL SUPPORTED BY