Paper Title :A CFD Analysis Of Centrifugal Pump To Improve Discharge By Varying Blade Geometry
Author :Anjani Kumar Sinha, A. John Rajan, Eriki Ananda Kumar
Article Citation :Anjani Kumar Sinha ,A. John Rajan ,Eriki Ananda Kumar ,
(2014 ) " A CFD Analysis Of Centrifugal Pump To Improve Discharge By Varying Blade Geometry " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 15-19,
Volume-2,Issue-11
Abstract : Centrifugal pumps are used in cooling the engine by pumping water as coolant into the engine. The normal function
of the coolant is to discharge coolant at a specific velocity into the engine coolant volume, once the coolant crosses 1500
C
temperatures then it is taken to the radiator for cooling to 500
C. Due to changes in the engine design it is desired to have
changes in the centrifugal pump design demanding for a larger discharge. The current discharge is 1.8 lit/s the objective will
be to increase the discharge which can be done by changing the blade angulations. One more variable which will be used to
control the discharge will be the gap between the cover and the impeller. Presently the gap is 1.5mm and the objective will be
to reduce the gap and determine whether this will have impact in the overall discharge. Decreasing will improve discharge
provided there is no increase in the turbulence of the system. FLOTRAN CFD is coupled field analysis software which couples
the two physics environment namely CFD and thermal module in Ansys will be simulate the flow.
Type : Research paper
Published : Volume-2,Issue-11
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-1404
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 93 |
| |
Published on 2014-11-01 |
|