Paper Title :Physical & Numerical Modeling of Overtopping Erosion and Earthen Embankment Breach
Author :Sanit Wongsa
Article Citation :Sanit Wongsa ,
(2016 ) " Physical & Numerical Modeling of Overtopping Erosion and Earthen Embankment Breach " ,
International Journal of Advances in Mechanical and Civil Engineering (IJAMCE) ,
pp. 27-34,
Volume-3,Issue-5
Abstract : Many studies of earthen embankment failure from overtopping flow have been conducted in various aspects. Most
of them have focused on the mechanism of erosion, and breach hydrograph. The results can be obtained either from physical
and numerical modeling and/or coupling techniques. In this research, the overtopping erosion of embankment breach and
failure characteristics were studied by using physical and numerical simulation. Fixed embankment slopes with scale of 1:8.5
were employed to perform the physical experiment. Flow discharges that can be supplied at 4 constant values were 4.14, 7.78,
11.59 and 16.48 l/s, respectively. The iRIC Nays2DH numerical model was applied to simulate both physical experiment and
field scale. It was found that simulated results are compared well in both water flow and breach morphological characteristics.
This indicates that the model simulation is reasonable for physical experiment and field scale. The obtained results can be
exploited to develop the guidelines for protection of hydraulic structures from failure caused by embankment overtopping,
flood damage and others.
Keywords- Earthen embankment, iRIC, Physical and numerical modeling, Overtopping
Type : Research paper
Published : Volume-3,Issue-5
DOIONLINE NO - IJAMCE-IRAJ-DOIONLINE-5871
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 59 |
| |
Published on 2016-11-03 |
|