International Journal of Mechanical and Production Engineering (IJMPE)
.
Follow Us On :
current issues
Volume-8,Issue-11  ( Nov, 2020 )
Past issues
  1. Volume-8,Issue-10  ( Oct, 2020 )
  2. Volume-8,Issue-9  ( Sep, 2020 )
  3. Volume-8,Issue-8  ( Aug, 2020 )
  4. Volume-8,Issue-7  ( Jul, 2020 )
  5. Volume-8,Issue-6  ( Jun, 2020 )
  6. Volume-8,Issue-5  ( May, 2020 )
  7. Volume-8,Issue-4  ( Apr, 2020 )
  8. Volume-8,Issue-3  ( Mar, 2020 )
  9. Volume-8,Issue-2  ( Feb, 2020 )
  10. Volume-8,Issue-1  ( Jan, 2020 )

Statistics report
Feb. 2021
Submitted Papers : 80
Accepted Papers : 10
Rejected Papers : 70
Acc. Perc : 12%
Issue Published : 92
Paper Published : 2080
No. of Authors : 5929
  Journal Paper


Paper Title :
The Ablation and Microstructural Properties Consideration of the Matrix Composites by Effect of Various Reinforcements

Author :M. Zamani, A.Rastgou

Article Citation :M. Zamani ,A.Rastgou , (2017 ) " The Ablation and Microstructural Properties Consideration of the Matrix Composites by Effect of Various Reinforcements " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 34-36, Volume-5,Issue-9

Abstract : The ablation properties, thermal resistance and micro structural behavior of the phenolic resin (Resole) composites have been investigated in this research. Different materials, such as carbon fabrics, glass fabrics, also silica and zirconia powders have been used as reinforcements for synthesis of the composites. The specimens were prepared with three sets of compositions. The first set was produced with 37.5 wt% of Resole and 62.5 wt% of reinforcements. Another set of specimens were produced with 40wt% Resole, 40 wt% of silica and 20 wt% of zirconia. Also to achieve high insulation index in Resole/carbon fabrics composites a thin film of zirconia coated at the back side of the specimens. To explore the ablation characteristics of the composites in terms of insulation index, erosion rate and microscopic pattern of ablation, an oxyacetylene torch flame with heat flux of 10 Mw/m2 at approximately 2800°C was used. The ablation behavior and microstructure of the burnt-through specimens were also observed, using scanning electron microscopy. It was found from ablation test that the erosion rates of the Resole/carbon fabric specimens are 20% lower than the other specimens. Additionally the high insulation index of the Resole/carbon fabrics coated with zirconia indicates that these composites are the best ablative materials in the present study. It has been also reported that those specimens filled with zirconia have the highest insulation index. Although the erosion rate of the Resole/silica composites were 20% higher than the Resole/glass fabrics, but a 5mm depth hole (from 10 mm thickness of the whole specimen) was seen at the center of the Resole/glass Fabric specimens. SEM observations show that proper adhesion between reinforcements and matrix is important to achieve improved ablative properties, it was also reported many changes in diameter, shape and the surface of the carbon fibers through the ablated area. These changes can be reduced from surface to back side of the specimens. Keywords- Ablation, Matrix Composites, Carbon Fabrics, Zirconia, Microstructural, Observations.

Type : Research paper


Copyright: © Institute of Research and Journals

| PDF |
Viewed - 45
| Published on 2017-11-23
   
   
IRAJ Other Journals
IJMPE updates
We are happy to announce that Dr. R. A. SAVANUR joined as the CHief Editor for IJMPE.
The Conference World

JOURNAL SUPPORTED BY